Lastly, I created the file system with sudo mkfs -t ext4 /dev/sda1 with the whole partition as its size. Next, creating a new partition: sudo fdisk, then in there n with p and 1 to create a new primary partition, then w to apply the changes and exit. In parted, select /dev/sda sets it up to modify the external hard drive, rm 1 deleted its main partition, q to quit parted. Thus, I installed parted using sudo apt-get install parted and used it sudo parted. ls /dev showed the hard drive as /dev/sda. The IP address was then easily found using arp -a.įirst off, I needed to format and mount my external hard drive to be usable as a Time Machine volume. So I strung an ethernet cable from my laptop to the Pi and enabled Internet Sharing in order to (1) start the DHCP server and (2) give the Pi internet access. Actually, I did not even have a network to connect it to. So the first thing I did was to enable SSH, which luckily is available right there in the configuration utility that starts when you boot the thing for the first time.Īfter that, I disconnected the display and immediately was stumped because I now had no way of finding the Pi's IP address. Really, I have no use whatsoever for the HDMI port on the Raspberry pi. After some searching and a combination of three adapter cables, I finally got it connected and could see it boot. Next, I was stumped because I only have an Apple LED display and no convenient way of connecting the Raspberry Pi's HDMI output to the LED display's Mini Display Port. I just installed the version of Debian that is provided on the official website. Format an SD card as described in the wiki.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |